Problems with Water4Gas and Gas4Free's water burning car systems

submitted: Aug 18th 2008 | by: FreeLifeMagazine | Total views: 1 | Word Count: 810 | PDF View | Print Article

With all the articles and information flooding the Internet about Water burning cars, HHO, Hydroxy, Hydrogen Fuel Injection, hydrogen on demand, Browns gas, or what ever the newest buzz words are for this technology, we just had to do some investigative reporting. The technology is real and Ronn Motor Company of Texas will be producing their 400 horse, 40 mile per gallon water burning hybrid sports car to prove it. With thousands of people worldwide converting their cars to burn hydrogen on demand hybrids we had to find which product is the best overall to increase you mileage and which one has the best design. In the process we discover a few flaws and we tell you what they are.

We chose Water4Gas as the best overall product, but they have a few bad points that we have to point out. Water4Gas is our overall choice, because they offer more gas saving products in their package that anybody else, making them the best choice to give you the most miles per gallon. You not only get the Hydrogen generator, but you get the PCV Enhancer, Fuel heater and the Map Sensor Enhancer.

Good Points: 1) The PCV enhancer is a proven technology and high performance race cars have them installed. It is basically an oil separator. It keeps oil and sludge from getting into the engine's carburetor and thus into the engine, which causes carbon build-up. That will help your engine run cleaner, last longer and increase mileage. Every car should come from the manufacturer with one of these. When you start using one you will be surprised at how much oil and sludge is filtered out.

2) The Fuel heater is one of the extras that impressed us the most. Your car gets poor gas mileage because only vaporized gas will burn in your engine and the rest goes out the exhaust as pollution, or hydro carbons. Heating the fuel prior to being injected into the engine helps the gasoline to vaporize and burn more efficiency and you get more miles per gallon. That is because less gas goes in and you get more power. There are several expired U.S. patents to prove it this is real, but for some reason we do not have them on manufactured cars yet.

3) The Map Sensor Enhancer, or Efficient Fuel Injection Enhancer is really required for all cars that are 1996 or newer, because their engine's fuel injection is computer controlled. Many people have installed Hydrogen electrolyzers on cars with EFI (Efficient Fuel Injection), but they did not install a Map Sensor Enhancer and they complain that they did not get increased mileage. Then they cry that the technology does not work. The Map Sensor Enhancer corrects the signals from the oxygen sensor, so your engine does not run too rich. It adjust the amount of fuel it mixes taking into account the extra oxygen from the electrolyzer. The extra pure oxygen going into the carburetor also makes the gasoline more explosive helping the mileage.

Bad Points: 1) One of the problems with this product is the fact that the water is comtained in a fragile glass container, which is not very durable. If you install this device be very careful to secure it in a good location with the included cords. If you are careful it will not break.

2) They include and suggest baking soda as the electrolite, which is added to the water so it will conduct electricity allowing the electrolysis to occur and hydrogen to flow out of the water. Yes baking soda is an electrolyte and yes it does work, but it can cause the stainless wires in the electrolyzer to corrode and they will corrode to a point that the hydrogen generator will stop producing hydrogen all together. To keep the stainless from corroding it is much better to use potassium hydroxide or sodium hydroxide. Both are available for purchase purchased online and they can be found locally and they will not corrode the stainless.

Water4Gas Conclusion: Although the supplied product may not be 100% perfect, it can be easily modified to be more than sufficient to increase your mileage dramatically and pay for itself.

Choice for Best Design We really like the sturdy compact design of Gas4Free's hydrogen on demand electrolyzer and it is the most professional engineered design, especially when you take into consideration the limited space under the hood of most newer cars. If you have everything you need except the actual generator, or if you already are running all the products from Water4Gas or a similar products then this would be an excellent upgrade that will make a better overall system. We highly recommend purchasing Water4Gas' package then upgrade the hydrogen on demand electrolyzer with the one from Gas4Free.

If these two companies were to ever merge together, then we would have the perfect affordable Hydrogen on Demand System

About the Author

Get in depth articles at Free Life Press about HHO water as fuel, and learn about the History & Mechanics of Hydrogen production via electrolysis


Comments

No comments posted.

You do not have permission to comment. If you log in, you may be able to comment.